0.3mm Thickness Insulation Binding Tape Polyester Resin Impregnated Fiberglass Web Banding Tape

1. Introduction:

Polyester Resin Fiberglass Banding Tape also known as Armature Banding Tape, Resiglass Tape, Fibre Banding Tape) is made from continuous filaments, high tensile electrical grade glass yarn, impregnated with thermosetting polyester base resin. The yarns are laid parallel to form a thin flat ribbon & utilising maximum tensile strength of the glass to give an exceptional strength.

As supplied the banding tape is soft & pliable with a slight amount of tack. During the cure the resin flows & fill voids & air space to produce a homogenous laminate. Finally, the fully cured band is rigid with a hard-smooth resin rich surface & forming a void free homogenous mixture of glass & resin. After application and curing the tape holds the body in radial compression.

2. Specification

3. Polyester Resin Fiberglass Banding Tape Transportation

Banding tape requires special and rapid transportation arrangements. Mutual consultation is suggested for appropriateness depending on the transit period, available modes, handling, etc. Considering the sensitivity of banding tape, the buyer needs to quickly take delivery of the consignment and store it suitably

4. Storage stability

The banding tape should be stored in a low temperature environment. When using, the tape should be restored to the surrounding environment. Outside the use time, it is best to put it in a plastic cover and seal it to keep it clean and prevent moisture from condensing on the product at low temperatures.

5. Properties

6. Features:

High heat resistance up to 200ºC; can withstand heating to 260ºC for a short time, while the solder may melt on the steel wire
Extremely high arc resistance, thereby minimizing the possibility of "flashover" that often occurs in steel belts
Resistant to moisture and corrosion
The smooth curing surface on the strap can reduce dust adhesion, otherwise it may cause tracking failure
Non-conductive material, thus eliminating the insulation required for strapping
Prevents the lashing strap from being tied, eliminating the extreme damage caused by the lifting armature coil experienced when the lashing wire and the steel belt are broken

7. Application fields:

The Polyglass banding Tape finds application in the taping of transformer legs (transformer core banding)..

Rotor banding Large-transformer banding Transformer banding

Engage in continuous innovation and high-quality leads to a bright future.

Changshu Jiangnan Glass Fiber Co., Ltd is one of the leading professional manufacturers and exporters of fiberglass composite and thermal resistance materials in China. The Company was established in 1956 and it is located in the famous Chinese cultural and historic city –Changshu. The plant covers a total area of more than 70,000 square meters. It is only 80km from Shanghai port and 200km from Ningbo port. The superior location makes it enjoy a pleasant climate all year round and convenient transportation facilities, such as by the Highway along the Yangtze River, Sujiahang Highway, and Changshu Port.

Presently, we have adopted the advanced high-speed rapier weaving machine, three twist yarn machines equipped with variable frequency unit controllers, and two-meter-width coating equipment to ensure the leading supplier to the market with powerful output and guaranteed quality. Jiangnan produces over 8,000 tons of fiberglass yarn, 50 million square meter alkali-resistant fiberglass mesh, 2.4 million pieces of fire blankets, 10 million meters of fiberglass cloth with silicone, polyurethane, Acrylic, EPDM coating, and 8 million square-meter of fabric used in the electronic industry and fireproof. The products are widely used in the field of construction, transportation, electricity, insulation material, wind power generation, and smoke curtains.

Moreover, our production and quality control team has more than 30 years of development and research experience in various fiberglass products. Meanwhile, Jiangnan has its own fire-test laboratory, according to the latest fire blanket standard. We have routine and extensive cooperation with world-leading testing organizations. We also have our own fiberglass yarn raw material subsidiary in Shandong - Shandong Jinming Glass Fiber Co., Ltd. Additionally, Jiangnan has an R&D investment and production capacity for blended fiberglass fabrics and special glass fiber fabrics.

Jiangnan and its products have been certified by various certification bodies and organizations with a number of certifications like ISO9001:2015 Quality Systems, ISO14001:2014 Environmental Systems, BSI Kitemark，LPCB, TUV, Australian QAS, and other certificates. Jiangnan has cooperative partners across several countries like America, Europe, Australia, Japan, Korea, the Middle East, and other countries.

Jiangnan will continue to make efforts to be the leader with competition and creativity in the global industries based on our core corporate values of "Superior Quality, High Integrity, Continuous Innovation"!